Yaesu FT3DR Advanced Manual

Also see for FT3DE: Operating manual Manual Instruction manual Instruction manual Operating manual

Contents

26AF-DUAL Receive FunctionThe AF-DUAL Receive Function allows reception of a radio broadcast during standby re-ception of A-band or B-band frequency (or frequency registered to a memory channel).When standby reception is active, no audio is heard on the standby frequency, howeverif a voice signal is detected, the reception of the broadcast radio will be paused, and thereceiver frequency will be heard.Dual Receive is a similar function. When using the Dual Receive function, every timethe transceiver checks for a signal on the specified memory channel during radio recep-tion, the radio reception is interrupted (approximately every 5 seconds). When using theAF-DUAL Receive Function, the radio reception is interrupted only when there is a call-ing signal from another transceiver.1. Set the A-band or B-band frequency for standby receive during broadcast radio re-ception.2. Touch [F MW]  [A.DUAL].• If [A.DUAL] is not displayed, touch [BACK ←] todisplay [A.DUAL] and then touch it.• The AF-DUAL function is activated, and AF DUAL“ ” icon will be displayed.• Pressing the [BAND] key each time switches be-tween the AM broadcast (middle wave band) andFM broadcast.3. Rotate the DIAL to tune to the frequency of thebroadcast station.• The AF-DUAL receive function can also be used to monitor a radio frequency registeredto a memory channel or memory bank.• Pressing [MONI] switch during radio reception, allows receiving the standby frequency.• While listening to the radio using the AF-DUAL function, in standby receive mode, thetransceiver cannot simultaneously receive broadcasts on the AM frequency (middle waveband) on either the band-A or band-B, and FM frequency.z Disable the AF DUAL function1. Touch [F MW]  [A.DUAL].