163. Rotate the DIAL knob to select4. Touch [DEL].Confirmation screen “DELETE?” is displayed.5. Touch [OK] twice.• The memory channel is deleted from the CAM groupand the list display returns.• To cancel the deleting, touch [CANCEL].CY02 005 445.212.50BL03 006 445.312.50-------------------LX01 001 445.012.50Memory Channel ListSince memory channels are displayed in a list, you can easily recall the memory bychecking the frequency and memory tag display.1. Touch [F MW] [MEMORY].• If [MEMORY] is not displayed, touch [FWD →] to dis-play [MEMORY] and then touch it.• You can switch between memory tag display and fre-quency display by press and hold the [V/M] key.• The “ ” icon is displayed at the left of memory chan-nels set as skip memory, and the “ ” icon is displayedat the left of memory channels set as specified memo-ry.2 439.700.003 145.620.004 432.500.001 145.030.002. Rotate the DIAL knob to select the desired memory channel.3. Touch [ENT] to recall the selected memory channel and enter memory mode.The Memory Channel Only ModeThe FT3DR/DE may be set to operated only in the registered memory channels.1. While pressing the [V/M] key, press and hold the POWER switch to turn the trans-ceiver ON.• The memory channel only mode is ON, the previously selected memory channel isrecalled.• Rotate the DIAL knob to select the memory channels.• Touch the frequency display to display the numeric keypad, enter a 3-digit memorychannel number, and then touch [ENT] to recall the memory channel.• In the memory only mode, only the following functions will operate:• Changing the communication mode (touch [MODE])• The transmission mode setting of the AMS function (touch [AUTO], [TX FM] or [TX DN])• Group monitor (GM) function (press the [GM] key)• WIRES-X function (press the [X] key)• Audio level adjustment• SQL level adjustment (press the [SQL] key)• Key lock function (press the POWER switch)• Pressing the [V/M] key, will sound the beep, “M-ONLY” will be displayed, and the functionwill not operate.z Canceling Memory Only Mode1. Turn the transceiver OFF; and then while pressing the [V/M] key, press and hold thePOWER switch to turn the transceiver ON.