Yaesu FT3DR Advanced Manual

Also see for FT3DE: Operating manual Manual Instruction manual Instruction manual Operating manual

Contents

145. Rotate the DIAL knob to select the memory channel toregister, and touch [ENT].• Repeat step 5 to register multiple memory channels.• Up to 5 channels can be registered in one group.6. Press the [BACK] key to return to the CAM screen.2 439.700.003 145.620.004 432.500.001 145.030.00z Changing the name (tag) of CAM groupChange the name of CAM group from the default setting.1. In step 2 of “Register memory channel to CAM group”,turn the DIAL knob to select the group to change thetag.2. Touch [EDIT] and enter up to 16 characters for the CAMgroup tag.z Change the name (tag) of CAM memoryChange the name of Memory channels registered in theCAM group from the default setting.1. In step 3 of “Register memory channel to CAM group”,turn the DIAL knob to select the memory channel tochange the tag.2. Touch [EDIT] and enter up to 4 characters for the CAMmemory channel tag.Using the CAM function1. Touch [F MW]  [CAM].• If [CAM] is not displayed, touch [FWD →] to display[CAM] and then touch it.• The CAM screen is displayed, and the signal strengthof the channel that received the signal is displayed asa bar graph.• On the channel that received the signal, the bar graphwill continue to display in gray even if there is no sig-nal, so later you can check the channel on which thecommunication was performed, and the maximumsignal strength received later.YAESUz Touch the bar graph to switch the frequency1. Touch the bar graph on the screen.• The touched bar graph is displayed in yellow andswitched to the memory channel frequency and received.• Press the PTT switch to transmit as it is, so you canstart communicating with the other station immediately.• Touch [RECENT] to return to the original frequency.YAESU