Yaesu FT3DR Advanced Manual

Also see for FT3DE: Operating manual Manual Instruction manual Instruction manual Operating manual

Contents

17Using Memory BanksThe transceiver allows using up to 24 memory banks to be recalled with the sortedmemory channels. One memory channel may also be registered in two or more memorybanks according to the intended use.Example of registering memory channels to the memory banks:~~Memory channels Memory banksBANK1 (1 - 100) 144 MHz Amateur Band ChannelsBANK2 (1 - 100) 430 MHz Amateur Band ChannelsBANK3 (1 - 100)BANK4 (1 - 100) All Amateur Band ChannelsBANK5 (1 - 100)BANK6 (1 - 100) Air Band ChannelsBANK7 (1 - 100)BANK8 (1 - 100)BANK9 (1 - 100)BANK10 (1 - 100)BANK24 (1 - 100)1 145.000 MHz2 145.500 MHz3 120.400 MHz4 -5 439.700 MHz6 432.800 MHz7 108.700 MHz8 -9 -10 -900 -Registering to Memory Banks1. Press the [V/M] key to enter the memory mode.2. Rotate the DIAL knob to recall the memory channel toregister in the memory bank.3. Touch and hold [F MW].Memory channel will blink.4. Rotate the DIAL to select the memory bank (BANK1 toBANK24) to register the memory channel.BANK 1The memory bank channels are displayed between the memory channel 1 (1CH),and PMS memory channel U50.5. Touch [M.WRITE].The memory channel is registered in the selected memory bank and the transceiveroperation returns to the memory mode.