13CAM (Club Channel Activity Monitor) functionUp to 10 groups with 5 channels each, of frequently used memory channels* may beregistered, and then while receiving the current frequency, the status (signal strength) ofthe selected group of memory channels may be displayed. It is easy to identify on whichchannel the communication was made.When a memory channel on the graph is touched, it will become the center operatingfrequency, so communication with friends may begin immediately.* Only channels in the frequency range of 108 MHz to 579.995 MHz may be stored.YAESUCurrently selected memory channel(displayed in yellow)Touch the bar graph, it willbe the transmit/receivefrequency.Memory channel numbercurrently selectedCAM memory channel tag displayMemory channel tagDisplay in gray even if the received signal is lostCAM Group tag displayReturn to the frequency before memory channel selectionCAM Group selectionRegister memory channel to CAM group1. Touch [F MW] [CAM].• If [CAM] is not displayed, touch [FWD →] to display [CAM] and then touch it.• The CAM screen is displayed.2. Touch [GROUP], and then turn the DIAL knob to selectthe group (CAM1 to 10) to be registered. YAESU3. Touch [MEMBER].A list of memory channels registered to the CAM groupis displayed. 2 GROUP 023 GROUP 034 GROUP 041 GROUP 014. Touch [ADD].G1-2 5 439.700.00G1-3 6 432.500.00G1-4 ----------------G1-1 1 145.30.00