Yaesu FT3DR Advanced Manual
Also see for FT3DE: Operating manualManualInstruction manualInstruction manualOperating manual
                                             | |
Contents
|
21Setting Skip Memory Channel and Specified Memory ChannelFor efficient memory channel scanning, two types of memory channels may be desig-nated, “skip memory channels” and “specified memory channels”. Set “Skip MemoryChannels” will be skipped during the memory scanning; and only “Specified MemoryChannels” will be scanned during specified memory channel scanning.1. Recall the memory channel to skip or specify.2. Press and hold the [DISP] key touch [MEMORY] [5 MEMORY SKIP].3. Rotate the DIAL knob to change as follows:• • • OFF SKIP SELECT • • •• SKIP: Skip Memory ChannelThe “ ” at the right of the memory channelnumber lights up, and then the channel isskipped during scanning of memory channels.• SELECT: Specified Memory ChannelThe “ ” at the right of the memory channelnumber lights up, and then only designatedmemory channels are scanned during memo-ry scanning.• OFF: Normal Memory ChannelThe “ ” or “ ” at the right of the memory chan-nel number turns OFF.Skip MemorySpecified Memoryz Scanning Only the Specified Memory Channels1. Recall the memory channel registered as a specified memory channel.2. Touch [F MW] [SCAN].• If [SCAN] is not displayed, touch [BACK ←] to display [SCAN] and then touch it.• Only the memory channels registered as the specified memory channels arescanned.Unless two or more specified memory channels are registered, the specified memorychannel scanning does not function.Skipping Unwanted Scan Frequencies (Skip Search Memory)During the VFO scan, an unwanted frequency may be skipped by registering it to the “skipsearch memory channels” in advance.z Set the temporary scan stop to the skip search memory1. Press and hold the [F MW] key to temporarily stop the VFO scan.2. Rotate the DIAL knob to select a skip search memory channel from 901-999.Only skip search memory channels 901-999 may be selected.3. Touch [M.WRITE].The beep sounds, and the search skip channel is saved to memory, then the scanresumes.z Specifying Unwanted VFO Scan Frequencies |
Related manuals for Yaesu FT3DE
manualsdatabase
Your AI-powered manual search engine