62. Rotate the DIAL knob to select the call sign of theother transceiver, then touch [DEL].Confirmation screen “DELETE?” is displayed.W6DXCDELETE?3. Touch [OK] to delete.• When finished registering in the DP-ID list, “COMPLETED” is displayed for threeseconds.• If not registering another DP-ID, touch [CANCEL].• If deleting several DP-IDs, repeat step 2 and 3.4. Press the PTT switch to save the setting and return to normal operation.Communicating with specified other station in the Analog FM modeSelecting the Squelch Type in the Analog FM Mode1. Touch [F MW] [GM].If [SQTYP] is not displayed, touch [FWD →] to display[SQTYP] and then touch it.2. Turn the DIAL knob and select the type of squelch, refer to the table below.Tone squelch (CTCSS), DCS and the New PAGER (EPCS) functions do not operate inthe C4FM digital mode. Touch [MODE] to change to the Analog FM mode, or turn theAMS function ON.Squelch type Iconindication DescriptionOFF -Deactivates the tone squelch function and DCS functionOFF, then returns to the normal squelch operation in theAnalog FM mode.TONE Analog FM Transmissions contain the CTCSS tone.Receives as a normal squelch operation.TONE SQL Activates the CTCSS tone squelch function on AnalogFM receive.DCSActivates the Digital Code Squelch (DCS) function.The DCS code may be selected from 104 codes (from023 to 754).REV TONEActivates the reverse tone function.Used to monitor communications based on the squelchcontrol system. When a signal contains the designatedtone, the squelch is not opened, and when the tone signaldisappears, the squelch opens, and communication starts.