18Open the Memory Bank display1. Press the [V/M] key to enter the memory mode.2. Touch [F MW] [BANK].If [BANK] is not displayed, touch [BACK ←] to dis-play [BANK] and then touch it.B1 to B24: The memory bank display: The memory channel displayMemory Bank NumberMemory Channel NumberIf no memory channel is registered, setting the following operation sounds the beep and “NOBANK” will be displayed.z Disable the memory bank display1. Touch [F MW] [MR].If [MR] is not displayed, touch [BACK ←] to display [MR] and then touch it.Open Memory Bank Channels1. While the memory bank is displayed, press the [BAND] key.2. Rotate the DIAL knob to select the memory bank (BANK1 to BANK24) to berecalled.If no memory channel is registered, the memory bank may not be selected.3. Press the [BAND] key or PTT switch.The selected memory bank is activated.Canceling a Memory Channel Registered in Memory a Bank1. Recall the memory bank to cancel registering.2. Touch and hold [F MW].3. Rotate the DIAL knob to select the memory channel to cancel registering to thememory channel.4. Touch [ ], and then touch [M.DEL].
