Yamaha AV-XS80 Owner's Manual

Also see for AVX-S80: Owner's manual

8PREPARATION STEPSIn order to enjoy sound and video images with this soundsystem, follow the procedures as described below. Seeeach page for details.Installing batteries in the remote control (P.3)Speaker setup (P.9)• Speaker placement (P.9)• Installing the speakers (P.10)Connections (P.12 – 17)• Connecting TV and audio/video components (P.12)• Connecting the antennas (P.14)• Connecting the speakers (P.15)• Connecting the AC power cord (P.17)• Turning on the power (P.17)Adjusting speaker output levels (P.18)Before connecting components• Do not connect this system or other components to themains power until all connections between thecomponents have been completed.• Be sure all connections are made correctly, that is tosay, L (left) to L, R (right) to R, “+” to “+” and “–” to“–”. Some components require different connectionmethods and have different jack names. Refer to theoperation instructions for each component to beconnected to this system.• Insert the plugs properly. The speakers may not outputany sound or may output noise if they are not insertedproperly.• The name of jack corresponds to input selector.• The VOLTAGE SELECTOR on the rear panel of AVR-S80 and SW-S80 must be set for your local mainvoltage BEFORE plugging into the AC main supply.Voltages are 110-120V/220-240V AC, 50/60 Hz.(China, Korean and General models only)After connecting components• Check them again to make sure they are correct.110 – 120V 220 – 240VVOLTAGESELECTORVOLTAGE SELECTORAVR-S80 (General model)II0V–I20V220V–240VVOLTAGESELECTORSW-S80 (General model)E3-S80-8-18(6.29)a 02.6.29, 4:32 AM8