Yamaha AV-XS80 Owner's Manual

Also see for AVX-S80: Owner's manual

24BASIC PLAYBACK Selecting PRO LOGIC IIYou can enjoy the 2-channel sources decoded into fivediscrete channels by selecting PRO LOGIC II in programNo. 9.(While playing a 2-channel source)1 Press AMP.2 Press q/DTS.The previously selected sub program appears on thefront panel display.3 Press SELECT repeatedly to select thedecoder, PRO LOGIC II.4 After selecting on the decoder (PRO LOGICII), select the mode appropriate for thesource by pressing q/DTS.The selection switches as follows;PRO LOGIC II Movie ↔ PRO LOGIC II Musicy• You can select PRO LOGIC, PRO LOGIC II Movie, and PROLOGIC II Music by pressing DSP on the front panelrepeatedly.Note• Playback using DOLBY PRO LOGIC II decoders is possibleonly for 2-channel signals. Playing Dolby Digital SurroundEX or DTS ES softwareWhile playing a 5.1-channel source, press MATRIX 6.1to turn on the Dolby Digital + Matrix 6.1 or DTS +Matrix 6.1 decoder.The rear center channel is created from rear left and rightchannels, and output from virtual rear center speaker.While playing a 5.1-channel source, the display changesAUTO ^ Matrix6.1 ^ OFF each time the MATRIX 6.1button is pressed.• AUTO: This mode automatically switches DolbyDigital + Matrix 6.1 and DTS + Matrix 6.1depending on the signal. Virtual rear centerspeaker does not work for 5.1 channelsources.• Matrix6.1: This setting produces 6-channel playbackof the input source using the Matrix 6.1decoder. The virtual rear center speaker canbe used when playing a 5.1-channel source.• OFF: Virtual rear center speaker does not work inthis setting.y• When the Matrix 6.1 decoder is functioning, the “MATRIX”indicator lights up on the front panel display.Notes• Some Dolby Digital Surround EX or DTS ES software may notcontain the signal that is necessary for this system to switch tothe Matrix 6.1 decoding mode. To turn on the Matrix 6.1decoder when playing such a source, press Matrix6.1.• Playing a 6.1-channel source is not possible even ifMATRIX6.1 is pressed in the following cases:– when “1C REAR LR” in the SET MENU is set to NON;– when the sound effect is turned off;– when headphones are connected;– when a Dolby Digital KARAOKE source is being played;– when 5ch Stereo is selected.• The setting becomes AUTO once this system turns into standbymode. Virtual CINEMA DSPWith Virtual CINEMA DSP, you can enjoy all DSPprograms without rear speakers. It creates virtual speakersto reproduce a natural sound field.You can listen to Virtual CINEMA DSP by setting “1CREAR LR” in the SET MENU to NON. Sound fieldprocessing changes to Virtual CINEMA DSPautomatically.y• When Virtual CINEMA DSP is functioning, the “VIRTUAL”indicator lights up on the front panel display.Note• This system is not set in the Virtual CINEMA DSP mode evenif “1C REAR LR” is set to NON in the following cases:– when the 5ch Stereo, DOLBY DIGITAL Normal, Pro LogicNormal, Pro Logic II, or DTS Normal program is selected;– when the sound effect is turned off;– when 96-kHz sampling digital signals are input to thissystem;– when using the test tone; or– when connecting the headphones.E4-S80-19-26(6.29)b 02.6.29, 4:33 AM24