4-30BRAKE POWRTR2. Install: Brake pads Pad springInstallation steps: Connect a suitable hose 1 tightly to the cali-per bleed screw 2 . Put the other end of thishose into an open container. Loosen the caliper bleed screw and push thepistons into the caliper with your finger. Tighten the caliper bleed screw 2 .Bleed screw:6 Nm (0.6 mkg, 4.3 ftlb) Install the brake pads and pad spring.3. Inspect: Brake fluid levelRefer to “BRAKE FLUID LEVEL INSPEC-TION” in CHAPTER 2.4. Check: Brake lever operationA soft or spongy feeling Bleed brake sys-tem.Refer to “AIR BLEEDING (HYDRAULICBRAKE SYSTEM)” in CHAPTER 2.
