5-35A.C. MAGNETO AND STARTER CLUTCH ENGNOTE:NOTE:NOTE:INSTALLATION1. Install: Starter clutch While holding the magneto rotor with thesheave holder, tighten the starter clutch bolt. Do not allow the sheave holder to touch theprojection on the magneto rotor.Sheave holder90890-01701, YS-01880-A2. Tighten: Bolts 1Bolt (starter clutch):12 Nm (1.2 mkg, 8.7 ftlb)LOCTITE3. Install: Woodruff key Magneto rotor Washer Bolt Clean the tapered portion of the crankshaftand the magneto rotor hub. When installing the magneto rotor, make surethe woodruff key is properly seated in the key-way of the crankshaft.4. Tighten: Bolt 1Bolt (A.C. magneto rotor):130 Nm (13.0 mkg, 94.0 ftlb) While holding the A.C. magneto rotor 2 withthe sheave holder 3 , tighten the magneto ro-tor bolt. Do not allow the sheave holder to touch theprojection on the magneto rotor.Sheave holder90890-01701, YS-01880
