3AB6 7TRACK TENSION ADJUSTMENT/SLIDE RUNNER INSPECTION INSPADJ456 745CAUTION:TRACK TENSION ADJUSTMENTTrack alignment Shiftedto rightShiftedto leftLeft adjuster Turn out Turn inRight adjuster Turn in Turn out8 Slide runner 9 Track10 Track metal 11 Gap 12 ForwardA RX10K, RX10RK, RX10RSKB RX10MK, RX10MSKc. Adjust the track deflection until the specifiedamount is obtained.Track deflection More thanspecifiedLess thanspecifiedLeft adjuster Turn in Turn outRight adjuster Turn in Turn outThe adjusters should be turned an equalamount. Recheck the alignment and deflection. Ifnecessary, repeat steps (a) to (c) until thespecified amount is obtained. Tighten the rear axle nut.Nut (rear axle):75 Nm (7.5 mkg, 54 ftlb)SLIDE RUNNER INSPECTION1. Inspect: Slide runner 1Cracks/damage/wear Replace.2. Measure: Slide runner thickness aOut of specification Replace.Slide runner wear limit:10 mm (0.39 in)
