SPEC144Route the fuel tank breatherhose behind the steering gate.Wire harnessBracketWhen the gear position switchlead is equipped with reverse,route it to the reverse gear.If it is not equipped with reverse,insert it to the inner side.Fuse boxCoolant reservoir tankClampBrake hoseParking brake cableAfter clamping, bend it 90°downward.ClampClamp the hose at the whitepaint position.Point the clamp position to thefront outside.Clamp the battery positive leadand battery negative lead.LatchEngine oil tank hosePoint the clamp tightening direc-tion to the downward.Drain hoseLess than 30 mm (1.2 in).Pass the coolant reservoir tankbreather hose through betweenengine and heat exchanger.Clamp the rear suspension sub-lead. (RX10GTL)To the tail/brake light.Pass the wire harness andunused lead for the electronicrear suspension between theribs of side cover 2 and frame.CABLE ROUTING
