2-51FUSE INSPECTION/SPEEDOMETER UNIT INSPECTION INSPADJWARNINGNever use a fuse with an amperage otherthan that specified. Improvising or using afuse with the wrong amperage rating maycause extensive damage to the electricalsystem, cause the lighting, ignition, gripwarmer, signal and meter systems to mal-function and could possibly cause a fire.SPEEDOMETER UNIT INSPECTION1. Inspect: Speedometer unitInspection steps: Remove the speedometer coupler 1 andheadlight coupler 2 . Connect the speedometer unit test coupler 3to the speedometer coupler and headlightcoupler. Connect the speedometer unit test couplerleads as follows.Speedometer unit test coupler lead (red) 4 Battery (+) terminalSpeedometer unit test coupler lead (black)5 Battery (–) terminalSpeedometer unit test coupler:8EK-82507-09, YS–45686 Check that the light and LCD in the speedome-ter light up. If the light does not light up. Check thebulbs.Refer to “BULB(S)” in CHAPTER 8. If the LCD is not indicated. Replace thespeedometer unit.
