8-11STARTER MOTOR DOES NOT OPERATE.WARNINGBefore starter motor operation, push the engine stop switch to “OFF”.1. Connect: Starter relay terminals(battery side and starter motor side)Jumper lead2. Check: Starter motor operationCheck the battery and connectors.Refer to “BATTERY INSPECTION” in CHAP-TER 2.NOOK3. Disconnect: Starter relay coupler4. Connect: Starter relay coupler terminalsJumper lead5. Inspect: Starter motor operationReplace the starter relay.NOOK1NOCharge and/or replace thebattery.Refer to “BATTERY INSPEC-TION” in CHAPTER 2.Repair or replace the starter motor.OKWARNINGA wire for the jumper lead must have theequivalent capacity as that of the batterylead or more, otherwise it may cause thejumper lead to be burned.This check is likely to produce sparks, sobe sure that no flammable gas or fluid is inthe vicinity.11*ELECTRICAL STARTING SYSTEM ELECTROUBLESHOOTING
