7-11CARBURETORS CARBNOTE:2. Adjust: Throttle position sensor positionAdjustment steps: Disconnect the throttle position sensor cou-pler. Connect the test coupler to the throttle positionsensor. Connect three dry cells (1.5 V 3 pcs.) in se-ries to the test coupler.Dry cells (–) 1Dry cells (+) 2 Connect the digital multimeter to the test cou-pler.Digital multimeter (–) lead 1Digital multimeter (+) lead 3 Measure the voltage A .When measuring the voltage A be sure that thetest coupler is connected to the throttle positionsensor. Calculate the specified voltage B .Specified voltage B = Voltage A (0.136) Loosen the throttle position sensor bolts 4 . Connect the digital multimeter to the test cou-plerDigital multimeter (–) lead 1Digital multimeter (+) lead 3 Adjust the throttle position sensor position toobtain the specified voltage B . Tighten the throttle position sensor bolts 4 . Disconnect the test coupler and connect thethrottle position sensor coupler.
