4-32BRAKE POWRTRNOTE:WARNINGWARNINGBRAKE CALIPER DISASSEMBLYBefore disassembling a caliper, drain brakefluid from brake hose, master cylinder, brakecaliper and brake reservoir of their brake fluid.1. Remove: Pistons Piston oil seals 1Removal steps: Using a wood of piece 2 , lock the right pis-ton. Blow compressed air into the hose jointopening a to force out the left piston fromthe caliper body. Remove the piston seals and reinstall thepiston. Repeat the previous steps to force out theright piston from the caliper body. Never try to pry out the pistons. Do not loosen the retaining pin 3 .BRAKE CALIPER INSPECTION ANDREPAIRRecommended brake componentreplacement scheduleBrake pads As requiredPiston seals anddust sealsEvery two yearsBrake hose Every two yearsBrake fluid Only when brakesare disassembled.All internal brake components should becleaned only with new brake fluid. Do notuse solvents as they will cause seals toswell and distort.