5-29VALVES AND VALVE SPRINGS ENGNOTE:NOTE:INSTALLATION1. Deburr: Valve stem end(with an oil stone)2. Lubricate: Valve stem 1 Valve stem seal 2(with the recommended lubricant)Recommended lubricantMolybdenum disulfide oil3. Install: Valve 1 Lower spring seat 2 Oil seal 3 Valve spring 4 Upper spring seat 5(into the cylinder head)Install the valve spring with the larger pitch afacing up.Smaller pitch bMake sure that each valve is installed in its origi-nal place. Refer to the following embossedmarks.Right and left intake valve(-s): “4XV:”Middle intake valve(-s): “4XV.”Exhaust valve(-s): “5LV”
