| Configuring Basic Settings | 109Parameter Description Configuration MethodDST Start MonthDST Start Day of WeekDST Start Day of Week Last inMonthStart Hour of DayWhen you select By Week as thefixed type, configures the starttime of DST.Note: It only works when youenable Daylight Saving Time.Web user interfaceDST Stop MonthDST Stop Day of WeekDST Stop Day of Week Last inMonthEnd Hour of DayWhen the DST calculationmethod is set to By month,configures the end time of DST.Note: It only works when youenable Daylight Saving Time.Web user interfaceOffset(minutes) Specify the DST offset time (inminutes).Valid value: from -300 to +300.Note: It only works when youenable Daylight Saving Time.Web user interfaceManually Configuring the Time and DateYou can set the time and date manually when the system cannot obtain the time and date from the NTPtime server.Procedure1. Do one of the following:• On your web user interface, go to Setting > Date&Time.• On your VCS, go to More > Setting > Basic > Date & Time.On your VP59, tap Setting > Basic > Date & Time.• On your CTP20, tap Setting > Basic > Date & Time.2. Configure and save the following settings:Parameter Description Configuration MethodManual Time/Time Type Select On/Manual Setting toobtain the time and date fromthe NTP server automatically.Web user interfaceEndpointCTP203. Configure the time and date.4. Save the change.
