| System Maintenance | 225Exporting the Log Files to a USB Flash DriveYou can export local log to the connected USB flash drive.Procedure1. On your web user interface, go to Setting > Configuration > Local Log.2. In the Enable Local Log field, select On.3. In the USB Auto Exporting Syslog field, select On.4. Click Confirm.A folder named yealink.debug appears in your USB flash drive, which includes the log files.Note:The severity level of the exported Module Log will not be greater than the local Log Level. Forexample: If you set Local Log Level to 3 and set Talk log Level to 6, the exported Talk log Levelwill still be 3. If you set Local Log Level to 5 and set Talk log Level to 4, the exported Talk logLevel will be 4.Exporting the Log Files to a Syslog ServerYou can also configure the phone to send syslog messages to a syslog server in real time.Procedure1. On your web user interface, go to Setting > Configuration > Syslog.2. Configure and save the following settings:Parameter Description Configuration MethodEnable Syslog Select On to enable the systemto upload log messages to thesyslog server.Default: On.Web user interfaceSyslog Server Configure the IP address orthe domain name of the syslogserver.Web user interfacePort Configure the port of the syslogserver.Web user interfaceSyslog Transport Type Configure the transport protocolthat the device uses whenexporting log messages to thesyslog server.• UDP• TCP• TLSDefault: UDP.Web user interface
