| Configuring Network Settings | 72Network Speed and Duplex ModeYou can configure the network speed and duplex mode for the system. The network speed and duplexmode you select for the system must be supported by the switch.VP59 allows you to configure the speed of Internet port and PC port.• Supported Transmission Methods• Configuring Transmission MethodsSupported Transmission MethodsThe supported transmission methods for VC880/VC800/VC500/PVT980/PVT950 system’s Internet port arelisted below:• Auto• Full Duplex (transmit in 10Mbps, 100Mbps or 1000Mbps)• Half Duplex (transmit in 10Mbps or 100Mbps)The supported transmission methods for VC200 endpoint’s Internet port are listed below:• Auto• Full Duplex (transmit in 10Mbps or 100Mbps)• Half Duplex (transmit in 10Mbps or 100Mbps)The supported transmission methods for VP59 are listed below:• WAN Port Link• Auto Negotiation• Full Duplex (transmit in 10Mbps, 100Mbps or 1000Mbps)• Half Duplex (transmit in 10Mbps or 100Mbps)• PC Port Link• Auto Negotiation• Full Duplex (transmit in 10Mbps, 100Mbps or 1000Mbps)• Half Duplex (transmit in 10Mbps or 100Mbps)Configuring Transmission MethodsProcedure1. On your web user interface, go to Network > Advanced > Port Link.For VP59, on your web user interface, go to Network > Advanced > Port Link.
