| Configuring Video Settings | 139Display Layout Settings• Setting the Default Layout for a Single Screen• Configuring Change Layout by Content Sharing• Hiding Local Video Image in Equal Layout• Configuring Hide Local Video When PIP• Configuring Multi-Camera Default Layout• Configuring Voice Activation• Configuring the View Switching• Configuring Preview LocalSetting the Default Layout for a Single ScreenWhen only one monitor is connected to the system, you can configure the default layout when a call isestablished.About this taskFor VP59, if you do not connect a monitor to it, it is single screen by default.Procedure1. On your web user interface, go to Setting > Call Features > Layout > Default Layout of SingleScreen.On your VP59, go to Setting > Call Features > Default Layout.2. Configure and save the following settings:Parameter Description Configuration MethodDefault Layout ofSingle Screen Configure the default layout of single screenwhen a call is established.• Remote big Local small—the remotevideo image is shown in the big size, andthe local video image below is shown inthe small size.• Remote Full screen—the remote videoimage is shown in full size.• Equal NxN—the remote and local videoimages are shown in the same size.• Picture in Picture—the remote videoimage is shown in full screen, and localvideo image is shown in the PIP (Picture-in-Picture). (it is not applicable to VP59)Default: Picture in Picture. For VP59, thevideo image of the remote party is displayedin large window and the local video image isdisplayed in small window.Web user interface
