| Getting Started | 17Port Name Description① USB • Connect to a USB flash drive.Insert a USB flash drive for storingscreen shots, the recorded videosand captured packets. If multiple USBflash drives are connected, only thelast one can be identified.• Connect to an audio input device viaa USB to line input adapter.• Connect to an audio output devicevia a USB to line input adapter.• Insert a WF50 Wi-Fi USB Dongle forconnecting to Wi-Fi or providingwireless AP.• Insert a BT42 Bluetooth USB Donglefor connecting to the CPW90-BTBluetooth wireless microphones.• Insert a PSTN box CPN10 forconnecting to the PSTN (PublicSwitched Telephone Network).② VC Hub/Phone • For wired content sharing, connectthis port to the Codec port on theVCH50 video conferencing hub.• If you need an audio device, connectthis port to the Internet port on theCP960 Conference phone.• Connect to VCM34. (It is notapplicable to PVT950)③ DC48V Connect to the power source via apower adapter.④ HDMI Connect to a monitor.⑤ Internet Connect to the network device.⑥ Reset Key Reset the system to factory defaults.⑦ Security Slot Allow you to connect a universalsecurity cable to the codec, so you canlock the codec down. The system cannotbe removed when locked.Hardware of VC200 CodecYealink VC200 is an entry-level smart video conferencing endpoint designed for small and huddle room.VC200 possesses many features, including ultra HD 4K, 4 x digital zoom camera, 103° super-wide anglelens, white balance automatic gain and others. With 6 beamforming microphone arrays for direct voicepickup and Yealink Noise Proof Technology, VC200 brings excellent audio effect in small rooms andensures that everyone can be heard clearly.• Front Panel of VC200 Codec• Rear Panel of VC200 Codec• Bottom of VC200 Codec
