| Configuring Video Settings | 1412. Configure and save the following settings:Parameter Description Configuration MethodHide Local Video When PIP Enable or disable the local videoimage to hide in the PIP (Picture-in-Picture).• On—the local video image ishidden in the PIP.• Off—the local video image isshown in the PIP.Default: Off.Web user interfaceConfiguring Multi-Camera Default LayoutDuring a call, if you connect VCC22, all the local video streams are synthesized to one video stream, andsent to the far site. You can configure the default layout when you connect multiple cameras and set thecamera you want to highlight.Procedure1. On your web user interface, go to Setting > Camera > Camera.2. Configure and save the following settings:Parameter Description Configuration MethodMulti-camera Default Layout Configure the default cameralayout when you use multiplecameras.The supported layouts aredescribed as below:• 1+N• Selected Speaker• AverageNote: the default value is 1+N.It is not applicable to VC200/VC500/PVT950.Web user interfaceSelect a camera Select the camera you want tohighlight.Note:The first connected camera.This configuration appears onlyif Multi-camera Default Layoutis set to 1+N or SelectedSpeaker.It is not applicable to VC200/VC500/PVT950.Web user interfaceNote: It is not available if you only connect one VCC22 to the system and you disable the maincamera or the connected VCC22.
