| Configuring Network Settings | 60Viewing the Wireless Network StatusYou can view the wireless network status.Procedure1. Do one of the following:• On your web user interface, go to Network > Wi-Fi > Wi-Fi Status.• On your VCS:On your VC880/VC800/VC500/PVT980/PVT950, go to More > Setting > Advanced > Wi-Fi > Wi-FiStatus.On your VC200, go to More > Network > Wi-Fi > Wireless Status.On your VP59, tap Setting > Network & Connection > Wireless Network > Wireless Status.• On your CTP20, tap Setting > Advanced > Network > Wireless Network > Wireless Status.2. View the detailed wireless network information (for example, SSID or the signal strength).Forgetting a Wireless NetworkThe device will automatically save the network that has been connected ever. To avoid the deviceconnected to a saved wireless network automatically, you can configure the device not to save it. Next timeyou need enter the password to connect the network.Procedure1. Do one of the following:• On your VCS:On your VC880/VC800/VC500/PVT980/PVT950, go to More > Setting > Advanced > Wi-Fi.On your VC200, go to More > Network > Wi-Fi > Wi-Fi.On your VP59, tap Setting > Network & Connection > Wi-Fi.• On your CTP20, tap Setting > Advanced > Network > Wireless Network.2. Select the connected wireless network.3. Select Forget the Network.Disabling the Wi-Fi FeatureProcedure1. Do one of the following:• On your web user interface, go to Network > Wi-Fi > Wi-Fi Config > Wi-Fi.• On your VCS:On your VC880/VC800/VC500/PVT980/PVT950, go to More > Setting > Advanced > Wi-Fi.On your VC200, go to More > Network > Wi-Fi > Wi-Fi.On your VP59, tap Setting > Network & Connection > Wi-Fi.• On your CTP20, tap Setting > Advanced > Network > Wireless Network.2. Disable the Wi-Fi.
