| Getting Started | 13Hardware of PVT980 CodecPVT980, targeted at large meeting room, is applicable to the meeting room with a rack or the lecture hall.Possessing rich physical interfaces for audio and video connection, PVT980 can be connected to the 3rd-party camera or access to the video matrix. In addition, it comes with the professional RCA-in/out interfacethat integrates the mixer with the gooseneck microphone.The following introduces the corresponding ports on PVT980.Port Name Description① LED Indicator Indicate different statuses of the system.② Reset Key Reset the system to factory defaults.③ USB • Connect to a USB flash drive.Insert a USB flash drive for storing screen shots, the recorded videos andcaptured packets. If multiple USB flash drives are connected, only the lastone can be identified.• Insert a WF50 Wi-Fi USB Dongle for connecting to Wi-Fi or providingwireless AP.• Insert a BT42 Bluetooth USB Dongle for connecting to the CPW90-BTBluetooth wireless microphones.• Insert a PSTN box CPN10 for connecting to the PSTN (Public SwitchedTelephone Network).④ Camera Port Connect to a third-party camera.⑤ RCA In Connect to an audio input device via an RCA cable.⑥ RCA Out Connect to an audio output device via an RCA cable.⑦ Display Connect to a monitor for video images output.⑧ VC Hub/Camera • For wired content sharing, connect this port to the Codec port on theVCH50 video conferencing hub.• Connect this port to the Camera port on the VCC22 video conferencingcamera.• If you need an audio device, connect this port to the Internet port on theCP960 Conference phone.⑨ Internet Connect to the network device.
