| Configuring Camera Settings | 163Configuring WDR-ManualWDR-Manual mode is not applicable to VC200.Procedure1. Do one of the following:• On your web user interface, go to Setting > Camera > Exposure.• On your VC880/VC800/VC500/PVT980/PVT950, go to More > Setting > Camera > Exposure.• On your CTP20, tap Setting > Camera > Exposure.2. Select WDR-Auto from the Exposure Mode drop-down menu.3. Configure and save the following settings:Parameter Description Configuration MethodExposureCompensation Configure the value of exposurecompensation.The exposure compensation is used tocompensate the camera effectively when thecamera is shooting in the backlighting. If theenvironment light is dark, you can increasethe compensation value.Valid value: from -6 to 6. The default value is0.Web user interfaceEndpointCTP20Exposure Ratio Configure the value of exposure ratio.Note: the valid value is 1 to 16. The defaultvalue is 1.The exposure ratio represents the ratio oflong exposure to short exposure. In a backlitenvironment, the bright part uses a shortexposure and the dark part uses a longexposure.Web user interfaceEndpointCTP20Adjusting Display Image of the CameraTo display high quality video image, you can adjust display mode of the camera or customize the imagedisplay. This feature is not applicable to VP59.Procedure1. Do one of the following:• On your web user interface, go to Setting > Camera > Graphics.• On your VCS:On your VC880/VC800/VC500/PVT980/PVT950, go to More > Setting > Camera Setting >Graphics.On your VC200, go to More > Setting > Video & Audio > Graphics.• On your CTP20, tap Setting > Camera > Graphics.
