Axioscope 5/7/Vario Contents / List of Illustrations ZEISS03/2018 430035-7344-001 3CONTENTSPage1 INTRODUCTION ................................................................................................... 91.1 Notes on instrument safety .......................................................................................... 91.2 Warning labels on the microscopes............................................................................ 131.3 Notes on the warranty ................................................................................................ 162 DESCRIPTION OF THE INSTRUMENT ................................................................. 172.1 Intended use ................................................................................................................ 172.2 Technical data.............................................................................................................. 182.3 Interface diagram ........................................................................................................ 202.4 Controls and functional elements on the microscope ............................................... 212.4.1 Stand models ................................................................................................................. 212.4.2 Axioscope 5 stands, Bio-TL ............................................................................................. 222.4.3 Axioscope 5 stand, Bio-TL/RL .......................................................................................... 242.4.4 Axioscope 5 stand, Pol-TL/RL .......................................................................................... 262.4.5 Axioscope 5 stand, Mat-TL/RL ......................................................................................... 282.4.6 Axioscope 7 stand, Mat-TL/RL mot. ................................................................................. 302.4.7 Axioscope 5 Vario material stand .................................................................................... 322.4.8 Functions of stands keys and display elements................................................................. 342.5 Controls and functional elements on microscope components ................................. 362.5.1 Binocular photo tube 30°/23 (100:0/0:100) ..................................................................... 362.5.2 Binocular ergo tube/ergo photo tube 20°/23 and ergo photo tube 15°/23, each withcontinuous vertical adjustment ....................................................................................... 372.5.3 Nosepiece with objectives ............................................................................................... 382.5.4 Mechanical stage 75x50 ................................................................................................. 382.5.5 Low-power system for 2.5x/4x objectives mounted on the condenser carrier .................... 392.5.6 0.9/1.25 BF condenser and 0.9 Pol condenser ................................................................. 392.5.7 14x40 mm stop sliders for aperture and field diaphragms ................................................ 402.5.8 Reflector turrets with 4 or 6 coded positions ................................................................... 412.5.9 Reflector slider with 2 coded positions ............................................................................ 413 START-UP ........................................................................................................... 423.1 Mounting standard components ................................................................................ 423.1.1 Unpacking and setting up microscope stand ................................................................... 423.1.2 Mounting the Axioscope 5 Vario material upper stand part on the stand column ............. 433.1.3 Mounting the binocular tube/photo tube ........................................................................ 443.1.4 Inserting eyepieces or auxiliary microscope or pinhole diaphragm .................................... 443.1.5 Screwing in objectives .................................................................................................... 463.1.6 Inserting and removing push-and-click (P&C) reflector modules into the reflector insert .... 473.1.7 Mounting the reflector insert .......................................................................................... 483.1.8 Mounting the mechanical stage ...................................................................................... 48
