START-UPZEISS Mounting standard components Axioscope 5/7/Vario56 430035-7344-001 03/20183.1.11 Mounting/removing the 80x60motorized mechanical stage on theAxioscope 7 motorized materialstandThe motorized stage can only be mountedon/removed from the stand as an entire unit withthe stage carrier (see section 3.1.15 on page 59).How to remove the stage• Unplug the power cable connector (Fig. 3-20/1)of the stage from the socket on the stand(Fig. 3-20/2).• Turn the stage (Fig. 3-19/1) and stage carrier(326HFig. 3-19/6) upside down and remove the fourmounting screws (Fig. 3-19/5) with the Allenwrench (AF 3) (327HFig. 3-19/4).• Carefully remove the stage from the carrier.How to mount the stageFig. 3-20 Plugging in the power cable of the motorized mechanical stage• Turn stage (329HFig. 3-19/1) and stage carrier (330HFig. 3-19/6) upside down carefully and match the threadedholes in the bottom of the stage (Fig. 3-19/2) to the corresponding holes in the carrier (332HFig. 3-19/3).• Insert the four mounting screws (333HFig. 3-19/5) into the holes.• Align the stage in XY-direction and tighten the screws with the Allen wrench (AF 3).• Plug the power cable connectors (330HFig. 3-20/1) into the sockets on the stage (330HFig. 3-20/3) and on thestand (330HFig. 3-20/2).Fig. 3-19 Changing the motorized mechanicalstage
