I NSTALLING O THER F AX /D ATA S OFTWARE64You can use fax/data software other thanRapidComm (the fax/data software on theConnections CD). Your modem wasdesigned for and tested using a wide range ofcommunications software packages. Thissection will guide you through some of thedetails you may need to know when installingother communications software packages.Type of ModemMost communications software programs willask you to select the type of modem you areusing. Select a U.S. Robotics Sportster highspeed modem. If that selection is not listed,pick Courier Dual Standard, V.32bis, orV.34.KEY POINT: Refer to your softwaremanual for the program’s installationinstructions. The software’s installationprogram will ask you questions about themodem you are using.Initialization StringFor hardware flow control, a fixed serial port rateand full result codes, type AT&F1 and pressENTER. If you must use software flow control,type AT&F2 and press ENTER.NOTE: If you use the Modem Stationprogram to configure your modem, youmust use ATZ for the initialization string..
