Remote Wake-Up 17Remote Wake-UpRemote Wake-Up is the ability to remotely power-on a PCfor after-hours administration.Remote Wake-Up support is enabled by connecting aRemote Wake-Up cable from the NIC’s Remote Wake-Up(RWU) connector to a 3-pin Remote Wake-Up connectoron the PC motherboard. See “Connecting the RemoteWake-Up Cable” in Chapter 2 for instructions.Remote Wake-Up CableA Remote Wake-Up cable is shipped with each NIC thatsupports this feature.To order additional Remote Wake-Up cables, contact 3Com: Toll-free number for the United States and Canada:1-877-226-4604 Toll number for international calls:1-510-226-4604Remote Wake-Up RequirementsThe following NICs support Remote Wake-Up: 3C905C-TX-M 3C905B-TX 3C905B-TX-M 3C905B-COMBO 3C905B-FX 3C900B-FLYour PC or server must have a management applicationthat supports Remote Wake-Up. In addition, the followingitems ar required to use Remote Wake-Up.For 3C905C-TX-M NICs, if your PC is compliant withPCI 2.2, Remote Wake-Up is automatically enabledthrough the PCI bus. The Remote Wake-Up cable is notrequired. (See your PC documentation if you are unsurewhether your PC is compliant with PCI 2.2.)
