B INSTALLING THEDYNAMICAccessLAN AGENTOverviewThis chapter explains how to install and configure theDynamicAccess LAN agent on a PC running Windows 95,Windows 98, or Windows NT.Client PC RequirementsThe DynamicAccess LAN agent can be installed on a PCrunning Windows 95, Windows 98, Windows NT 4.0,or Windows NT 3.51.The following table lists the minimum client requirementsand recommended Microsoft Service Packs (if any) for theversion of the DynamicAccess LAN agent that is includedon the EtherCD.For an overview of the DynamicAccess LAN agent, see“DynamicAccess LAN Agent” in Chapter 1. For detailedinformation on using, configuring, and troubleshootingthe DynamicAccess LAN agent, access the DynamicAccessTechnology User Guide on the EtherCD. You can alsodownload it from:http://www.3com.com/dynamicaccessCAUTION: If you plan to install the DynamicAccess LANagent on a multiprocessor PC running Windows NT 4.0,Service Pack 4, you must first download and install theappropriate Microsoft patch available at:.http://www.3com.com/dynamicaccess/hotfixesFailure to install the patch will result in system failure.
