44 C HAPTER 3: I NSTALLING NIC S OFTWARE IN W INDOWSInstalling the 3Com NIC Diagnostics ProgramThis section describes how to install the 3Com NICDiagnostics program after you have already installedthe network driver. This program is for PCs runningWindows 95, Windows 98, or Windows NT 4.0.The 3Com NIC Diagnostics program allows you to run teststhat determine the status of your network, the NIC, andRemote Wake-Up. It also allows you to configure the NIC,view network statistics, and access support databases.To install the 3Com NIC Diagnostics program:1 Turn on the power to the PC and start Windows.2 Insert the EtherCD in the CD-ROM drive.The EtherCD Welcome screen appears.If the EtherCD Welcome screen does not appear, enter thefollowing command from the Run option of the WindowsStart menu:d:\installs\setup.exewhere d:\ represents the letter name of the CD-ROM drive.3 Click NIC Software.4 Click NIC Drivers and Diagnostics.5 Click Update NIC Driver.6 Click Update with Diagnostic Program.7 Select your operating system to continue theinstallation.The Completing NIC Installation screen appears.8 Click Done.9 Exit the EtherCD, and then restart Windows.The installation is complete.When you install the 3Com NIC Diagnostics program,your network driver is automatically updated to thelatest version on the EtherCD.
