54 C HAPTER 4: I NSTALLING THE N ETW ARE C LIENT AND S ERVER D RIVERS4 Press [Insert].This key tells the server installation program that you wantto add a driver externally.5 Press [F3].This key tells the server installation program that you wantto change the path.6 At the prompt, enter the following command:NWSERVERFor example:a:\nwserverThe installation program gathers the files and prompts youfor a NIC selection.7 Press [Enter] to select the driver displayed andcontinue the installation.Loading the Driver ManuallyTo update an existing server driver manually:1 Copy all of the files from the \NWSERVERsubdirectory on the EtherCD to the server'shard drive.2 Boot the server and launch the Install program.3 Add the following line to the AUTOEXEC.NCF file(assuming the server start directory is C:\NWSERVER,where the LAN drivers and NLM files were copied):LOAD C:\NWSERVER\3C90X.LANSLOT=The variable is the hexadecimal slot numberof the PCI NIC. This address can be obtained by issuinga load command, where the driver identifies the slotnumbers. Pressing Esc prevents loading the driver. Becauseof Novell's scheme for identifying PCI slots, it is not possiblefor 3Com to pre-identify the slot number.
