Installing the NetWare Server Driver 55Installing Multiple NICsTo support more than one NIC in a NetWare server, changethe AUTOEXEC.NCF file to the following format:load C:\NWSERVER\3C90X.LAN slot=NAME= FRAME=bind ipx to net=load C:\NWSERVER\3C90X.LAN slot=NAME= FRAME=bind ipx to net=The values and are the numbers ofthe PCI slots in which the NICs are physically installed.To view the numbers of these PCI slots, use the3Com Configuration and Diagnostic program for DOS.See the next section, “Verifying the PCI Slot Number,”for instructions.The values and are unique namesassigned to each NIC by your system administrator. Thevalues and must be different.The frame parameters and can be one of the following: Ethernet_802.2 Ethernet_802.3 Ethernet_II Ethernet_SNAPMake sure that the frametype for the server and theworkstation is the same. For example, if the serveruses Ethernet_802.2, the workstation must also useEthernet_802.2.The values and are unique numbersassigned by the system administrator to each NIC. Makesure that and are different numbers.See the appropriate Novell NetWare manuals forfurther information.
