60 C HAPTER 5: C ONFIGURING THE NIC4 If your PC has more than one NIC installed, open theNetwork Interface Card (NIC) list box and select theNIC to be configured.5 Click the Configuration tab.The Configuration screen appears.6 Under Network Parameter, select the setting tobe changed.For a description of each setting, click the question mark (?)in the upper right corner of the screen, move it over asetting, and click once.7 Open the Set Value list box and select a new valuefrom the list of available options.Repeat the process to change any other configurationsetting.To undo changes and return the settings to their previousvalues, click Undo Changes.To return the settings to the factory default settings, clickSet Factory Defaults.8 Click OK to save the changes and exit the program.Configuring the Managed PC Boot Agent (MBA)This section explains how to configure the 3C905C-TX-Mand 3C905B-TX-M NICs’ Managed PC Boot Agent (MBA)boot ROM to boot from the network.Click Help to obtain general information about thefunction of a screen. To obtain specific information aboutany topic on a screen, click the question mark (?) in theupper right corner of the screen, move it over a topic, andclick once.For detailed information on using, configuring,and troubleshooting the MBA boot ROM, see theManaged PC Boot Agent User Guide, located withthe MBA software on the EtherCD.
