52 C HAPTER 4: I NSTALLING THE N ETW ARE C LIENT AND S ERVER D RIVERSNetWare 3.12To install the driver in a NetWare 3.12 server:1 Copy the MSM31X.NLM, ETHERTSM.NLM, andNBI31.NLM files from the EtherCD to the directory onyour hard drive where other NLM files are located.2 Copy the LAN driver file (3C90X.LAN) from theEtherCD to the same directory.3 Add the following two lines to the AUTOEXEC.NCF file:load C:\NWSERVER\3C90X.LAN slot=NAME= FRAME=bind ipx to net=4 Save and exit the file, and then reboot the server.NetWare 4.xThere are two ways to install the NetWare 4.x driver: Import the driver when installing the NetWareserver software. Copy the driver to the server's hard disk, and then loadthe driver manually.Importing the Server DriverTo import the server driver into a NetWare 4.x server:1 Install the NetWare server software.2 Insert the EtherCD in the CD-ROM when the NICselection menu appears.3 Press [Insert].This key tells the server installation program that you wantto add a driver externally.4 Press [F3].This key tells the server installation program that you wantto change the path.Make sure that you have the latest NetWare Support Packinstalled. that changes the LOADER.EXE file and providesthe NBI.NLM, MSM.NLM, and ETHERTSM.NLM files.3Com has provided the latest *.NLM files (at time oftesting) on the EtherCD in the \NWSERVER directory.
