Installing the Network Driver Using the EtherCD 41Windows NT 4.0To install the network driver:1 Turn on the power to the PC.2 Double-click the My Computer icon, then theControl Panel icon, and then the Network icon.The Network window appears.3 Click the Adapters tab.If networking has not been installed on your PC before,Windows NT asks you if you want to install networking. ClickYes. See the WINNT.TXT file located on the EtherCD or yourWindows NT documentation for instructions.4 Click Add.The Select Network Adapter dialog box appears.5 Click Have Disk.The Insert Disk dialog box appears.6 Insert the EtherCD in the CD-ROM drive.7 Make sure that the letter name of the CD-ROM drive(for example, d:\ appears in the entry box, and thenclick OK.The Select OEM Option dialog box appears.8 Make sure that the 3Com EtherLink PCI NIC isselected, and then click OK.The Adapters tab of the Network screen appears.9 Click Close.If the Microsoft TCP/IP Properties screen appears, enterthe requested information for your network environment.Refer to your system administrator or the Windows NTdocumentation for assistance.If the Microsoft TCP/IP Properties screen does not appear,the installation is complete.10 Click Yes to restart the PC.The network driver installation is complete. Go to“Verifying Successful Installation” later in this chapterto confirm that the NIC is properly installed.
