42 C HAPTER 3: I NSTALLING NIC S OFTWARE IN W INDOWSWindows NT 3.51To install the network driver:1 Turn on the power to the PC.2 In the Main window of the Program Manager,double-click the Control Panel icon and then theNetwork icon.3 Click Add Adapter.The Add Network Adapter window appears.4 Open the Network Adapter Card list box, andscroll down and select Requires diskfrom manufacturer.5 Click Continue.The Insert Disk dialog box appears.6 Insert the EtherCD in the CD-ROM drive. Makesure that d:\ appears in the entry box, where d:\represents the letter name of the CD-ROM drive, andthen click OK.The Select OEM Option window appears.7 Make sure that the name of the NIC is selected, andthen click OK.Files are copied. The Network Settings window appears.The name of the installed NIC appears in the list of installedadapter cards.8 Click OK.If the TCP/IP Configuration screen appears, enter therequested information for your network environment.Refer to your system administrator or the Windows NTdocumentation for assistance.If the TCP/IP Configuration screen does not appear, theinstallation is complete.9 Restart the PC.The installation is complete. Go to the next section,“Verifying Successful Installation,” to confirm that theNIC is properly installed.
