Installing the NetWare Server Driver 535 At the prompt, enter the command:NWSERVERFor example:a:\nwserverThe installation program gathers the files and promptsyou for a NIC selection.6 Press [Enter] to select the driver displayed andcontinue the installation.Loading the Driver ManuallyTo update an existing server driver manually:1 Copy all of the files from the \NWSERVERsubdirectory on the EtherCD to the server'shard drive.2 Boot the server and launch the Install program.3 Edit the AUTOEXEC.NCF file to add the following line(assuming the server start directory is C:\NWSERVER,where the LAN drivers and NLM files were copied):LOAD C:\NWSERVER\3C90X.LANSLOT=The variable is the hexadecimal slot numberof the PCI NIC. See “Verifying the PCI Slot Number” forinstructions on obtaining this number.NetWare 5.xThere are two ways to install the NetWare 5.x driver: Import the driver when installing the NetWareserver software. Copy the driver to the server's hard disk, and thenload the driver manually.Importing the Server DriverTo import the server driver into a NetWare 5.x server:1 Install the NetWare server software.2 Press [ESC] when the new hardware screen appears.3 Insert the EtherCD in the CD-ROM when the NICselection menu appears.
