12 C OMMAND L INE INTERFACEThe Webcache 1000/3000 has a Command Line Interface that allows youto manage certain features from a terminal. You may want to use theCommand Line Interface to setup the Webcache for managementthrough the console port or over your network via Telnet.This chapter describes how to access and use the Command LineInterface. It covers the following topics: Accessing the Command Line Interface Logging In To the Command Line Interface Understanding the Command Line Interface A Quick Guide to the Commands Getting Started Displaying and Changing IP-related Information Displaying and Changing Security Information Displaying and Changing Webcache Information and FunctionsAccessing theCommand LineInterfaceYou can access the Command Line Interface using: A terminal or terminal emulator connected to the console port of theWebcache directly, or through a modem. A terminal or terminal emulator connected to the Webcache over anIP network using Telnet. You can do this in two ways: Run a telnet session explicitly to the IP address or Domain NameSystem (DNS) name of the Webcache. Select System -> Control -> Telnet in the Web interface. This opensa telnet session to the Command Line Interface.You must use a VT52 or VT100/ANSI compatible terminal emulator.
