Webcache — Rear View Detail 21console port uses a standard null-modem cable and is set to 9600 baud,8 data bits, no parity and 1 stop bit.WAN Port The WAN port is an auto-negotiating 10BASE-T/100BASE-TX RJ-45 port.It is used to connect the Webcache to the network in an inlinedeployment environment.CAUTION: The Webcache does not support inline deployment in Version1.0. You should not connect network cabling to the WAN port.LAN Port The LAN port is an auto-negotiating 10BASE-T/100BASE-TX RJ-45 port. Itis used to connect the Webcache to the network in either Proxy orTransparent deployment environments. Web network traffic travels toand from the Webcache via the LAN port. For more information, see“Deploying the Webcache in Your Network” on page 33.You must connect the LAN port to your network using an appropriatenetwork cable. For more information, see the “Cable Specifications andPin-outs” appendix on page 147.WAN and LAN PortLEDsFigure 3 Webcache — WAN and LAN Port LEDsTable 4 lists LEDs visible on the rear of the Webcache, and how to readtheir status according to color. For information on using the LEDs forproblem solving, see “Solving Problems Indicated by LEDs” on page 32.
