114 CHAPTER 12: COMMAND L INE INTERFACE To display sub-menus:At the Select menu option prompt, enter the name of the menu ormenus. To display parent menus:At the Select menu option prompt, enter q. To display the Top-level menu:Press [Esc].Obtaining Help You can access the Command Line Interface help system at any time byentering ? at the Select menu option prompt.A Quick Guide tothe CommandsTable 12 describes the commands that are available in the Command LineInterface.Table 12 Command line interface commandsCommand What does it do?gettingStarted Specifies basic setup information for the Webcache.logout Exits the current user from the Command Line Interface.protocol ip basicConfig Specifies basic IP management configuration.protocol ip dnsConfig Specifies Domain Name System (DNS) configuration.protocol ip initializeConfig Resets IP information to factory default settings.protocol ip ping Pings other devices on your network.protocol ip summary Displays IP summary information.protocol ip traceRoute Traces the network hops to devices on your network.security password Specifies the password for the current user.security pwdRecover Enables and disables password recovery.system control initialize Initializes the Webcache to factory default settings.system control reboot Reboots the Webcache.system management community Sets the SNMP community string.system management contact Specifies a contact name for the Webcache.system management location Specifies location details for the Webcache.system management name Specifies a name for the Webcache.system summary Displays summary information for the Webcache.