Getting Started 115Getting Started The Getting Started command allows you to quickly configure or viewbasic setup information for the Webcache.To configure basic setup information:1 At the Top-level menu, enter:gettingStartedThe following prompt is displayed:Enter system name:2 Enter a system name for the Webcache. The name can be up to 80characters long.The following prompt is displayed:Enter system contact:3 Enter a system contact for the Webcache. The name can be up to 80characters long.The following prompt is displayed:Enter system location:4 Enter a physical location for the Webcache. The location name can be upto 80 characters long.The following prompt is displayed:Enter IP address [192.168.1.253]:5 Enter a valid IP address.The following prompt is displayed:Enter subnet mask [255.255.255.0]6 Enter a valid subnet mask.The following prompt is displayed:Enter gateway IP address [0.0.0.0]:7 Enter a valid gateway IP address.The following prompt is displayed:Enter host name8 Enter a valid host name.The following prompt is displayed:Enter domain name
