124 CHAPTER 12: COMMAND L INE INTERFACETo specify the contact name details:1 At the Top-level menu, enter:system management contactThe following prompt is displayed:Enter system contact []:2 Enter a system contact for the Webcache. The name can be up to 80characters long.Specifying LocationDetailsYou can specify physical location details for the Webcache using thelocation command on the Management menu.To specify the location details:1 At the Top-level menu, enter:system management locationThe following prompt is displayed:Enter system location []:2 Enter a physical location for the Webcache. The location name can be upto 80 characters long.Specifying aWebcache NameYou can specify a Webcache name using the name command on theManagement menu.To specify the name:1 At the Top-level menu, enter:system management nameThe following prompt is displayed:Enter system name []:2 Enter a system name for the Webcache. The name can be up to 80characters long.Setting the WebcacheSNMP CommunityStringYou can set a new community string for the Webcache using thecommunity command on the Management menu. You are setting thecommunity string that must be provided by SNMP managementapplications seeking to manage the Webcache.
