118 CHAPTER 12: COMMAND L INE INTERFACE Specify an IP address to be tracedSpecifying Basic IPConfigurationYou can use the basicConfig command on the IP menu to configure theIP stack of the Webcache. This will allow you to manage the Webcacheover IP via the CLI or Web interface. This command allows you toconfigure the IP address, subnet mask and the default router IP address.To configure basic IP management:1 At the Top-level menu, enter:protocol ip basicConfigThe following prompt is displayed:Enter IP address [196.168.100.1]:2 Enter a valid IP address.The following prompt is displayed:Enter Subnet mask [255.255.255.0]3 Enter a valid subnet mask.The following prompt is displayed:Enter Gateway IP address [196.168.100.2]:4 Enter a valid gateway IP address.Specifying DomainName SystemConfigurationYou can use the dnsConfig command on the IP menu to configure theDomain Name System settings of the Webcache. This command allowsyou to configure the host name, domain name and the Domain NetworkSystem (DNS) server address.To configure the Domain Name Settings:1 At the Top-level menu, enter:protocol ip dnsConfigThe following prompt is displayed:Enter host name:2 Enter a valid host name.The following prompt is displayed:Enter domain name3 Enter a valid domain name.
