72 CHAPTER 6: SECURITYYou must enter the following information in both the Getting Startedwizard and the Password Configuration screen:1 Choose between the following options by clicking the appropriate radiobutton: Do Not Change Password Change Password for the Account Set Admin Password to the Factory Default Setting2 Either: If you choose Do Not Change Password, the existing password will notbe changed. If you choose Change Password for the Account, enter a newpassword in the Password field and enter it again in the Confirm field.Passwords can be up to 10 characters long, are case-sensitive and mustonly contain alpha-numeric characters. If you choose Set Admin Password to the Factory Default Setting, thepassword is automatically set to the default for the admin useraccount (no password).What is PasswordRecovery?If you forget the password for the admin user account, you will no longerbe able to perform important management operations on the Webcache.Password Recovery allows you to define a new password for the adminaccount, even though you have forgotten the current one, and regainaccess to the management interfaces.Enabling/DisablingPassword RecoveryIn order to perform password recovery, Password Recovery must beenabled on the Webcache.Password Recovery is enabled by default on the Webcache. You will onlyneed to complete the following steps if you want to check that passwordrecovery is enabled, or if you know that it has previously been disabled.You may want to disable password recovery if you are concerned aboutthe security of the Webcache. When password recovery is enabled,