7.6 Standard toolkitGeneralAll service (repairs, maintenance, and installation) procedures contains lists oftools required to perform the specified activity.All special tools required are listed directly in the procedures while all the toolsthat are considered standard are gathered in the standard toolkit and defined inthe following table.This way, the tools required are the sum of the standard toolkit and any tools listedin the instruction.Contents, standard toolkitToolQtySocket head cap 2.5-17 mm1Torque wrench 0.5-10 Nm1Small screwdriver1Plastic mallet1Ratchet head for torque wrench 1/21Socket head cap no. 2.5, socket 1/2" bit L 110 mm1Small cutting plier1T-handle with ball head1260 Product manual - IRB 1203HAC035728-001 Revision: N© Copyright 2009-2017 ABB. All rights reserved.7 Reference information7.6 Standard toolkit
