7 Reference information7.6. Standard toolkit3HAC030005-001 Revision: -196© Copyright 2006 ABB. All rights reserved.7.6. Standard toolkitGeneralAll service (repairs, maintenance and installation) procedures contain lists of tools requiredto perform the specified activity.All special tools required are listed directly in the procedures while all the tools that areconsidered standard are gathered in the Standard toolkit and defined in the table below.This way, the tools required are the sum of the Standard Toolkit and any tools listed in theinstruction.Contents, standard toolkitQty Tool1 Ring-open-end spanner 7-35mm1 Socket head cap 3, 5, 8 mm1 Torque wrench 4-33 Nm1 Small screwdriver1 Plastic mallet1 Ratchet head for torque wrench 1/21 Cut-off pliers1 90° angled bit holderSpirit level
